Key Features
| Performance Standard Serie |
| Stereo or mono setup |
| 500W Maximum output power |
| Built-in Low-pass filter |
| Signal Sensing Turn-on |
| Speaker level input |
| Power MOS-FET switching power supply |
| Die cast aluminium heat sink |
Amplifier Features
| Load Capability | 2Ω Stable |
| Maximum power output | 500W |
| Rated power output (4Ω) | 70W x 2 (4Ω) |
| Rated power output | 60W x 4 (4Ω) |
| Bridged power output (4Ω) | 170W x 1 |
| CEA-2006 Compliant | Yes |
| Low-pass Filter | Yes |
| Switched Mode Power supply | Yes, MOS-FET |
| Signal Sensing Turn-on | Yes |
| Line in | 2 RCA's |
| Speaker level Input | Yes |
| Single Side Terminals | Yes |
| Die-Cast Aluminium Heat Sink | Yes |
Amplifier-Specifications
| Rated power output (4Ω, 14,4V) | 70W x 2 (20Hz ~ 20000Hz, 1%THD) |
| Rated power output (2Ω, 14,4V) | 85W x 2 (1000Hz, 1%THD) |
| Rated power output (CEA-2006) | 70Watts RMS x 2 at 4 ohms and 1% THD |
| Low-pass Filter | 80Hz (-18dB/oct) |
| RCA Input Sensitivity | 0.2 ~ 5V |
| Speaker Level Input Sensitivity | 4 ~ 12V |
| Input Impedance | 10kΩ |
| Signal to Noise Ratio | 100dB |
| Signal to noise ratio (CEA-2006) | 80dBa (Reference: 1 Watt into 4 Ohms) |
| Frequency response (+0dB, -3dB) | 20Hz ~ 50Hz |
| Operating voltage | 14.4V (11V ～ 16V allowable) |
| Maximum current consumption | 15A |
| Dimensions (WxHxD) | 230 x 56 x 167(mm), |
| Weight | 1.4kg |
-
Maximum Output Power:250 W
-
RMS Power per channel at 2 ohm:85 W
-
RMS Power per channel at 4 ohm:70
-
Built-in filters:Low-pass filter (LPF)
-
Minimum Impedance:2 Ohm Ohm
-
Amplifier Class:Class A/B
-
General Features:Speaker level input
